3D Issue Knowledge Base3D Issue Version 5Design/Content

Publication has limited zoom, doesn’t zoom far enough.

Contact Support
May 7, 2012 at 10:06 am #6414

When I zoom into a page, I expect the entire screen to be filled. Instead the publication is too small to read clearly, and is often distorted. How do I resolve this?

This can be easily fixed by changing your zoom settings. There are two methods to do this.

Flash/HTML5 viewer

1. Open your publication in the desired format.

2. Select the ‘settings’ option from the menu.

3. Locate a drop-down menu labelled ‘zoom to’.

4. Select this drop-down menu and click on ‘Custom Size’.

5. The publication will now zoom to its original size when you zoom in.

Within the 3D Issue Application

You can also change the zoom settings so they become the default for your readers. To do this follow these steps.

1. Open your publication in 3D Issue v5.

2. Select the ‘Design’ tab.

3. Navigate to the ‘Zoom Settings’ panel located on the left of the application. Expand this panel by clicking the arrow

4. You should have a number of options to customize the zoom settings. Locate a drop-down menu labelled ‘Width’.

5. Change the ‘Width’ from ‘browser’ to ‘100%’.

Both these solutions should solve your problem. If you have any further queries please contact our support team.

Note: For iPad it’s best to change the zoom setting to 100% for the best viewing experience.


Copyright © 3D Issue Ltd 2016. All rights reserved.