Skip to content

Upload to your own server over FTP

Flipbooks DesktopHow-to2 min read16 views

Tagged

You’ll end up with the flipbook built and uploaded to your own server, and its address shown when the build finishes.

You’ll need

  • The FTP server address, and the FTP username and password, from your host or webmaster.
  • The PDF imported into the software.

The software has a built-in FTP client that you only have to set up once. When you click Build it builds and uploads the flipbook, then shows its web link, for example www.yourdomain.com/foldername/issuename.

  1. In the OUTPUT tab, under Upload, click Add.
  2. Enter the FTP server address and your login details in the dialog that appears.
  3. Leave the new entry selected in the drop-down under Upload — it stays selected for later builds.
  4. Click Build.

The Output tab's Upload section: the hosting dropdown set to 3D Issue Cloud Hosting, with Add, Edit and Delete, and Add to Library below.

The Add FTP settings dialog: the server name and FTP server address, and, with Use FTP Login Details ticked, the username and password.

FTP and FTPS are supported; SFTP is not available yet. A flipbook that uploads but hangs on its preloader is usually the server’s file types rather than the upload: Server Configuration covers the IIS and MIME settings. If you would rather not run a server of your own, Cloud Services can host the publication instead: How do I upload my Flipbooks to your cloud servers?.

If it doesn’t work

  • Nothing arrives on the server. The upload follows the entry selected in the hosting drop-down, so check that your FTP entry is the one chosen, then build again.
  • You would rather not use the built-in client. The project folder can be uploaded by hand instead — see Publishing, sharing & embedding your flipbook.
  • The details are wrong or the server refuses the connection. Email support@3dissue.com.