Every error documented here has its own article, and most of those articles are titled with the message itself — which only helps if you already know how it is worded. This page groups them by what you were trying to do when the message appeared, and gives each one a first check.
Four ordinary causes account for most of them: a license file left behind by an earlier install, a PDF read from a network drive, a proxy or firewall in the way of the license server, and a computer renamed since installation. If none of the groups below fits, start there.
The software will not open, or will not stay activated
- When I try to open the software I receive the error License Error Validate (17). A license file from an earlier install is still on the machine. Delete the existing license files, then open the software again.
- When I run the software I receive an (D1)-(1024) error — The same conflict, needing a clean start: uninstall, delete the license file, then reinstall.
- I am getting a (B-0) error. The license manager did not answer in time — usually a damaged installation or file permissions. Reinstall; if it returns, contact support.
- 3D Issue can’t be opened because the identity of the developer cannot be confirmed.. macOS has not seen this developer before. Allow the app from Security & Privacy with Open Anyway.
- When I try to activate the software I receive a License Error Activate (3015) error. The serial number and the installed version disagree, which is what an old version activated with a new serial looks like.
- When I try to activate the software I receive a D1-3010 error. Every activation on that serial is already in use.
- Mac – When I login to the software I receive a D1-3010 error. The same code on a Mac at login, with a different cause: the license server is refusing that machine. Send its serial number to support.
- I have changed the name of my computer and now the software is saying ‘maximum numbers of activations reached’.. Renaming the computer registered a new machine name. Send the serial key to support so the old name is released.
The software cannot reach the license server
- When I try to access the software I receive the error “There is an issue with the network settings blocking the software from authenticating this account”. A firewall or proxy is blocking authentication. Add the proxy details at the login stage.
- I am getting a Mac activation error 3001 — The same block, reported as a Mac activation error. Check the firewall and proxy settings.
- Why do I get a Limited Trial message at login?. The software shows a trial because it cannot reach the servers. Configure the proxy at the login stage.
None of these three is a license problem: the serial is fine and reinstalling changes nothing until the network path is open.
A flipbook will not open or display
- When I try to view my flipbook locally I receive the “not registered on this domain” error. You opened index.html from the project folder. A flipbook is viewed through Preview in the software, not from the file.
- I receive the error “Sorry there appears to be a problem. This publication is not registered on this domain”.. The same warning after uploading: the domain is not registered. Add it under Setup, then Domains.
- When I attempt to open a Flipbook within the software, I receive a ‘Source files not found’ error. — “Source files not found” means the DO_NOT_UPLOAD folder, or the pdf folder inside it, is missing or empty.
- I am receiving the following error: ‘Message: low memory or corrupted memory’.. Memory pressure, or something in the PDF the software cannot digest. Restart first; if it returns, send the PDF to support.
- I am getting a ‘templates.xml’ error on my Mac. The app was launched from the mounted installer instead of Applications. Drag it across and reopen.
- I get an error – “Offline” is damaged and can’t be opened, when I try to open my offline file on Mac. The offline.app is not code-signed, so macOS refuses to run it.
- I am receiving the following error – IOS Apps requires secure server. iOS apps need HTTPS. Change the Issue and Library addresses to https.
A build, upload or publish stops
- Why does my magazine get stuck at 44%? — The PDF sits on a network or remote drive, or its name or folder contains special characters. Move it locally and rename it.
- I am receiving the error – Failed to initialize conversion plug-in. The conversion server had not started. Close the software, reopen it, and build once it is up.
- Why is my upload stuck in the queue?. The queue is blocked. Clear it from Queue Manager, then upload again.
A Studio project will not publish
- Why is my project not compliant? (e-127). The accessibility validator is set to require compliance and the project has open findings. Clear them, then publish.
The same code, in more than one article
Two pages sharing a code is the usual reason a search returns the wrong one: 3010 is a Mac login problem and an activation problem, and the fix is not the same.
| Code | What it means | Where to start |
|---|---|---|
(17) and (D1)-(1024) |
A license file left behind by an earlier install. | When I try to open the software I receive the error License Error Validate (17), When I run the software I receive an (D1)-(1024) error |
D1-3010 |
The license server will not accept this machine. | Mac – When I login to the software I receive a D1-3010 error, When I try to activate the software I receive a D1-3010 error |
3015 |
The serial number and the installed version disagree. | When I try to activate the software I receive a License Error Activate (3015) error |
3001 |
The activation request never reached the server. | I am getting a Mac activation error 3001 |
(B-0) |
The license manager did not answer in time. | I am getting a (B-0) error |
Publishing failures on the hosted products have their own pages: a Studio project that will not publish at all is Why is my project not compliant? (e-127). The lookup pages behind these articles are gathered in Reference index.